imgheight="1" width="1" style="display:none" src="" /

How to unclog a toilet? A clogged toilet can be a real pain. If your toilet is clogged, don’t panic! You can do a few things to try to unclog it before calling a plumber.

Follow our simple guide on how to unclog a toilet, and you’ll be back up and running in no time.

How to unclog a toilet – Pour a Kettle Full of Hot Water (Not Boiling) Into the Clogged Toilet

If the blockage is just something like toilet paper, often pouring a kettle full of hot water into the toilet can break it up and clear the blockage. Don’t use boiling water as this can crack the porcelain of your toilet bowl or damage the pipes.

Next, add a Quarter Cup of Dish Soap to the Toilet Bowl With More Hot Water

If that doesn’t do the trick in clearing the toilet drain, then in most cases, we find there is too much toilet paper to break down with just water.

Adding chemical solutions such as dish soap can help break down the blockage. Add a quarter cup of dish soap to the toilet bowl with more hot water and let it sit for about 10 minutes. You can then try using a toilet brush or freeing it with rubber gloves.

Then, dd One Cup of Baking Soda and Two Cups of Vinegar to the toilet bowl

If you don’t succeed with the toilet plunger, it’s time for something more substantial. Baking soda and vinegar is a grand mixture to fix toilet clogs. The best thing about it is that these are ingredients that you probably already have at home.

Start by adding baking soda to the toilet bowl, adding vinegar slowly, and letting it sit for about 20 minutes in the toilet water. At this stage, you can use a wire hanger to wiggle through and break up the blockage, effectively unclogging the toilet.

How to unclog a toilet – Use a Plunger to Plunge the Toilet for 10-15 Seconds

Still not working?

If you’ve followed the steps above and still can’t unclog your toilet, it’s time to use a plunger.

Start by adding some water to the toilet so that you dilute any dirty water,  then place the plunger over the hole at the bottom of the toilet bowl. Push and pull the plunger up and down for about 15 seconds, then flush to see if it’s working.

Step 5 – Use a Plumbing Snake to Dislodge the Blockage

A plumbing snake (or drain snake) saves you from persevering with wearing rubber gloves and getting down to the dirty business. Take your toilet auger, place the coil down into the toilet bowl, and then start cranking it. The snake will go through the pipe and break up the blockage. However bad your toilet trap, the toilet snake should do the trick!

Step 6 – Flush the Standing Water Remaining in the Toilet

Finally, flush the toilet to clear any standing water once you’ve dislodged the blockage. If your toilet is still not flushing correctly, open the tank lid and flush by pulling up the mechanism. Give it a few more flushes, and if necessary repeat one of the steps above.

We hope our guide on how to unclog a toilet has been helpful! If all else fails, you can always call a professional plumber. They’ll know exactly what to do to get your toilet unclogged in no time.

Conclusion: How to Unclog a Toilet the Right Way!

Hopefully, your clog clears with our D.I.Y guide. If not, please give us a call. Our plumbers have a range of expert blocked toilet solutions and will have your toilet back up and running in no time! We’re here to help, so please don’t hesitate to reach out.

If you enjoyed this blog post, check out our other blog posts on our website.